Double Quantity Cooking; Stage Cooking Programming - Rotel U1551CH Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

For example:
o Set the program as memory cooking; power level PL7 and cooking time is 1 minute
and 25 seconds.
 Step 1: In Ready Mode, press number button "1" for 5 seconds,"ProG" dis-
plays.
 Step 2: Press number button "3", the program will be saved for number "3".
 Step 3: Press number buttons "1", "2" and "5" to input the cooking time.
 Step 4: Press "Med-Hi 70%" button," PL7" displays. Setting finished.
 Step 5: Press «Start» button to save. When using the program next time, press-
ing number "3" will start the program.
o If the electricity is cut off, the saved program will not be lost.
o If the program needs to be reset, just repeat the aboved steps.
o Pressing the
«Stop/Reset» button
The settings will be lost.

Double Quantity Cooking

o The "X2" button allows the user to set the time for two particular food items.
o In Ready Mode, press "X2" button ("doub" displays), then press number buttons 0-9
within 5 seconds, the oven will start cooking with the preset cooking time.
o When pressing the number buttons, LED will display the quantity preset time. For ex-
ample, number button "5", its preset time is 1 minute:
Pressing the "X2" button, the time will change to 1:48 (1:00 + Cook Factor 80%)
o When the cooking program has finished, the oven will enter End of Cook Cycle Mode.
o Please note: This function cannot be used in Memory Mode.

Stage Cooking Programming

o This allows the user to cook food items at a combination of various Power Levels.
o Under cooking mode or memory mode, upto three stages can be set. After setting the
time and power for the first stage, press the
stage and repeat for the third stage.
o When setting the second or third stage, after pressing
3" displays.
o Press «Start» the button to start cooking.
For example:
o To set two stages as memory mode. The first stage is PL7 and time is 1 minute 25
seconds. The second stage is PL5 and 5 minutes and 40 seconds.
 Step 1: In Ready Mode, press number button "1" for 5 seconds,"ProG" dis-
plays.
 Step 2: Press number button "3", the program will be saved for number "3".
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
as the last step, will put the oven into Ready Mode.
«Time Entry» button
«Time Entry» button
80
to set the second
, "S-2" or "S-

Publicité

Table des Matières
loading

Table des Matières