Use Option Mode; Service Mode; Inquiry Function; Factory-Default Setting - Rotel U1551CH Mode D'emploi

 Step 3: Press number buttons "1", "2" and "5" to input the cooking time.
 Step 4: Press "Med-Hi 70%" button," PL7" displays.
 Step 5: Press
 Step 6: Press "5", "4","0" button, "5:40" displays.
 Step 7: Press "Medium 50%", "PL5" displays. The setting is finished.
 Step 8: Press «Start» button to save the programm.

Use Option Mode

o Open the oven door and press "2" for 5 seconds. The buzzer sounds once and the LED
displays "OP: - -".
o Press any number button to enter related mode setting.
For example, to set the volume of the beeper to medium, press " 2 ", "OP:22" displays.
If you want
"OP:21","OP:22","OP:23", "OP:20" .... in cycle.
o Pressing the «Start» button saves the current setting. After saving, "OP: - -" displays
again.
o During setting process, press the
Closing the door will enter the Ready Mode.
o If the «Start» button is not pressed after the last step, the program will not be saved.

Service Mode

o Open the oven door and press "3" for 5 seconds to enter service mode.
o LED displays "SErU".
o To check the times of closing or opening the door, just press number button "1", LED
will display the times.
o Press the «Start» button and then press number button "4" within 3 seconds, the
message will be cancelled. "4-CL" displays.
o Press
«Stop/Reset» button
Mode.

Inquiry Function

o During microwave cooking process, press
LED displays the power for 3 seconds, then turns back to previous state.
o It is available for multi-stage cooking.

Factory-default setting

o In power up and ready mode, press «Start» button and "0" to factory-default settings.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
«Time Entry» button
to change, keep
«Stop/Reset» button
to enter Door Open Mode. Closing the door will enter Ready
81
, LED displays "S-2".
pressing "2", LED
to enter the Door Open Mode.
to check the power level.
«Time Entry» button
displays "OP:20",