On The Fly Cooking; Programming Mode - Rotel U1551CH Mode D'emploi

o When the cooking program is finished, the oven will enter End of Cook Cycle Mode. If
you press
«Stop/Reset» button

On the Fly Cooking

o If User Option 5, On the fly, OP:51 is selected, the user may start another cook cycle
while the oven is cooking or paused.
o While the oven is cooking or under Pause Mode, press number buttons, the preset
cooking program will start automatically.
o LED displays the remaining cooking time.
o When cooking program finish, the oven will enter End of Cook Cycle Mode. If you press
«Stop/Reset» button

Programming Mode

o This mode allows the user to assign cook times and power levels to each number but-
ton.
o Open the door and press number "1" for 5 seconds, the buzzer will sound and the
Programming Mode will be entered, the LED will display "ProG".
o Press the number the program shall be saved on.
o Enter the time needed by pressing the numbers from 0 to 9 (see example below), the
LED will display the time.
o Enter the power level by pressing "Hold 0%", "Defrost 20%", "Medium 50%" or "Med-
Hi 70%", the LED will display the related power.
If the same button is pressed twice, the power will change to PL10 (High 100%). If no
power is chosen, PL10 is default.
o To change the cooking factors, press "X2" button, the LED will display "CF:XX". The
default factor is 80%, "CF:80" is displayed. Press one of the number buttons to change
it.
o After setting the time and power, press the «Start» button within 30s, the cooking
program will be saved. "ProG" displays after saving.
o When closing the door, the oven will return to Ready Mode.
o Please note: If the cooking time exceeds User Option 7, Max time, the buzzer will
sound three times briefly when pressing the «Start» button to save the program, and
the LED will turn back to show "ProG". The time set before will not be changed.
o Please note: When pressing the
the oven switches to Door Open Mode and the values entered will be lost.
When pressing a number button, the previous saved program will start; if no program
has been saved, the buzzer will alarm and it will not work.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
under this mode, the oven will enter Pause Mode.
under this mode, the oven will enter Pause Mode.
«Stop/Reset» button
79
during the programming process,