During Operation; Product Description - StarLab Vortex Mode D'emploi

VORTE X
ARTICLE NO. N2400-6110
1. Safety instructions
Before operation
Read the Instruction Manual carefully before use.
x
Ensure that only trained staff use the instrument. The instrument may only be opened by a
x
qualified and trained technician.
Make sure the socket is earthed before use.
x
Set the instrument on a stable, clean, dry, non-slip and fireproof surface.
x
Do not operate in hazardous areas.
x
Safe operation is only guaranteed with the original accessories from STARLAB. You willfind the
x
complete list in chapter 8.
Accessories must be securely attached.
x
Check instrument and accessories for damage before each use. Do not use damagedcompo-
x
nents.
The operation voltage mentioned on the label must match.
x
Always disconnect the plug before fitting accessories.
x
When working, wear personal protection to avoid the risk from splashing of liquids and possible
x
glass breakage which can result from mechanical vibrations.

During operation

Hold the tube as vertically as possible.
x
Place a tube at the centre of the mixing head. A sharp-edged tube can wear the mixing head.
x
Set the "speed-control knob" to the lowest position then gradually increase the speed.
x
Reduce the speed if the medium splashes out of the vessel or the instrument is unstable on the
x
bench.

2. Product description

The instrument is designed for mixing liquids.
Normal use:
The instrument is designed for use in professional laboratories. Do not use it in residential areas.
2