ACO Eco-Jet Manuel D'utilisation page 46

Grease Separator
Product Description
Type
Hydrojet OSE
Hydrojet RSE
Lipurat OSE
Lipurat RSE
Hydrojet OA
Hydrojet RA
Lipurat OA
Lipurat RA
46
Equipment
(1) = Intake
(2) = DN 65 disposal connection with a blind cover
(3) = Pneumatic box
(4) = Ring bolts
(5) = Inspection door(s)
(6) = HD cleaning head
(7) = Ventilation pipe connection (provision has been made for two
connections at the top on the side for oval grease separators
made of polyethylene)
(8) – (10) = Filling unit with a ball valve for manual operation
(11) = Discharge
(12) = HD pump for cleaning the interior
(13) = Fastening rings
(14) = Heating rod connection sleeve
(15) = Inspection glass with a wiper
(16) = Control for automatic operation
(17) = Stop valve
(18) = Disposal pump
(1) = Intake
(2) = DN 65 disposal connection with a blind cover
(4) = Ring bolts
(5) = Inspection door(s)
(6) = HD cleaning head
(7) = Ventilation pipe connection (provision has been made for two
connections at the top on the side for oval grease separators
made of polyethylene)
(8) – (10) = Filling unit with a magnetic valve (10) for automatic
operation
(11) = Discharge
(12) = HD pump for cleaning the interior
(13) = Fastening rings
(14) = Heating rod connection sleeve
(15) = Inspection glass with a wiper
(16) = Control box for automatic operation