Locating The Ir (Infrared) Blaster Led; Locating The Ir Module - Marmitek Invisible Control 6 XTRA Guide Utilisateur

5.2

Locating the IR (infrared) blaster led

Stick the IR blaster LEDs (2) wherever you like in the cabinet or
TV unit. You will then be able to operate all of the A/V devices in
that specific section.
With a correct placement one blaster LED can control all A/V

devices placed in the same compartment.
In some situations it is necessary to place a second blaster

LED if not all A/V devices can be controlled with one blaster
LED.
Or you place the blaster LED on one of the A/V devices in

the middle of the cabinet and the other equipment will be
controlled as well by the reflection of the infrared signal.
5.3

Locating the IR Module

Mount the IR Module (3) at an accessible place behind or
alongside your A/V equipment, in the vicinity of an electrical
socket.
Be aware of the cable length of the IR

blaster LEDs and the IR receiver.
Make sure that the connections remain

accessible and that the 'IR data' light
remains visible so you can check it is
working properly.
Use the self-adhesive strip which is

supplied to locate the IR receiver just about anywhere you
please.
8 © MARMITEK