Installing The Batteries; Description Of The Et25 "Rubber" Keys - Marmitek EASYTOUCH 25 Mode D'emploi

To allow direct control of all these appliances, in a convenient way, the ET25 has a
Touchscreen. The Touchscreen will only display the functions for controlling your specific
equipment.
The ET25 has unique features, combined with a big storage capacity, such as:
• "Macro" option: a total number of 20 key strokes can be stored under each of the
9 available Macro keys
• code learning, up to 40 keys per mode
• channel scan/search function
• video plus / show-view key
• All power off feature: to switch off all modes in 2 presses
• TV Volume/ Mute, whatever the last mode was selected
• Channel toggle key
• Customising of the screen, using a predefined list of symbols, according to your
specific needs
The ET25 contains a library of codes that are pre-programmed into the remote
control. This library covers nearly all the audio video products on the market today.
To make it easy for you to find the right code for your audio video appliance, we advise to
use the CODE SEARCH feature.

3 Installing the batteries

1. Open the cover on the back of the ET25
2. Insert 4 batteries (AAA size alkaline). Make sure the batteries are the same brand and
are NEW and observe polarities indicated inside the battery compartment.
3. All the user programmed parameters will be retained indefinitely during battery
replacement
4. Remove the plastic protection foil from the Touchscreen.

4 Description of the ET25 "rubber" keys

1: LED: Turns on whenever a rubber key or a Touchscreen key is pressed and indicates
when commands are being transmitted.
2: TV, VCR, SAT, CBL, DVD, AUDIO:
To select the appliance you wish to control.
3: POWER: to switch off the last selected appliance
4: VOL + / -: to control the volume
5: MACRO: to launch a macro (see chapter 10)
6: SET UP: to set the remote control for the appliance you wish to control. Allows the
access to secondary functions:
• Press and release the Setup key (A letter S appears on the top right hand
corner of the Touchscreen)
• Press the desired secondary function key (the "S" is turned off).
EASYTOUCH 25 5