Stihl BR 350 Notice D'emploi page 12

English
Removing the nozzle
2
3
Rotate the nozzle (1) in the direction
N
of the arrow until the lugs (3) are
covered.
Pull the nozzle (1) off the blower
N
tube (2).
Adjusting the control handle
Put the machine on your back and
N
adjust the harness – see "Fitting the
Harness".
1
2
3
Move the control handle (1) along
N
the blower tube (2) to the most
comfortable position.
Secure the control handle (1) with
N
the screw (3).
10
1
Engage the throttle cable (4) with
N
sleeve (5) in the retainer (6).
Wear mark on nozzle
The front end of the nozzle wears away
due to abrasive ground contact during
operation. The nozzle is subject to
normal wear and tear and must be
replaced when the wear mark is
reached.
Fitting the transport aid
When storing or transporting the
machine:
Secure the hook and loop fastener
N
to the blower tube – pull the flap
through the buckle.
Secure the blower tube to the
N
handle on the backplate.
BR 350, BR 430