Stihl BR 350 Notice D'emploi page 10

English
2
Push the pleated hose (4) over the
N
slip ring (2) as far as stop.
Position the hose clamp (3) as
N
shown in the illustration.
Tighten down the screw (arrow).
N
Mounting the blower tubes and nozzle
5 5
Assemble the blower tubes (5) and
N
nozzle (6).
8
Mounting the control handle
3
4
3
Pull the ends of the clamp on the
N
control handle (7) apart and push it
over stub of pleated hose (4).
Attach throttle cable to retainer on
N
the hose clamp (3).
Adjusting the control handle
Put the machine on your back and
N
adjust the harness – see "Fitting the
Harness".
6
Push the blower tube (5) into the
N
stub of pleated hose (4) as far as
the stop.
Move the control handle (7) along
N
the tube to the most comfortable
position.
Tighten down the screw in the
N
control handle (7).
BR 430 Blower Tube
Mounting the control handle
7
N
N
7
5
N
N
1
2
Pull the two halves of the clamp
apart.
Push the control handle (1) onto the
blower tube (2).
1
2
3
Line up the control handle (1) with
the tube's seam – as shown.
Secure the control handle (1) with
the screw (3) so that it can still be
moved on the blower tube (2).
BR 350, BR 430