Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Mounting the blower tubes
2
3
Depending on your height and
N
reach: Push blower tube (1) up to
the appropriate mark on the blower
tube (2).
Rotate the blower tube (1) in the
N
direction of the arrow and engage it
in the appropriate slot (3).
Mounting the hose clamps and pleated
hose
1
3
2
Push the hose clamp (1) (with
N
retainer for throttle cable) onto the
elbow (3) – the positioning marks
must face to the left.
Push the pleated hose (2) over the
N
elbow (3).
BR 350, BR 430
3
1
Push the hose clamp (1) onto the
N
pleated hose (2).
Line up the positioning marks on the
N
hose clamp (1) and elbow (3) – the
screw recess facing down.
Secure the hose clamp (1) with the
N
screw (4).
2
Push the hose clamp (5) (without
N
retainer for throttle cable) onto the
elbow (6) – the positioning marks
must face to the right.
Push the blower tube (6) into the
N
pleated hose (2).
1
2
4
5
6
2
5
6
7
Push the hose clamp (5) onto the
N
pleated hose (2).
Line up the hose clamp (5) and
N
blower tube (6) – as shown.
Secure the hose clamp (5) with the
N
screw (7).
Mounting the nozzle
3
2
Push the nozzle (1) onto the blower
N
tube (2) and engage it on the
lugs (3).
English
1
9
Publicité
Chapitres
Table des Matières
