Interactive Controls; Refrigerator Storage; Glass Shelves; Slide-Out Bins - Sub-Zero Icbpro3650 Guide D'utilisation Et D'entretien

I NTER AC T IV E C O N T RO LS
Interactive Touch Controls
For initial start up, touch and hold POWER on either
external touch display, located on the grille.
Temperature can be adjusted in one-degree increments.
The left and right external displays control different tem-
perature zones in the unit, but can both access the settings
menu.
EXT ER N AL T O U C H DI SPL AY
To unlock the display, touch and hold for three seconds.
The display will lock automatically after 30 seconds of inac-
tivity. Refer to the illustrations below.
To adjust the temperature, touch the temperature displayed
next to the corresponding zone icon.
To turn the ice maker on or off or to active max ice, touch
.
-18 3 3
C
C
Freezer display Refrigerator display
(914 mm model shown) (914 mm model shown)
S ETTINGS
To access the settings menu, touch
touch display.
SE TTIN G S
Activate or deactivate power to the unit
Enable or disable automatic display lock
Activate, deactivate, or refresh purifier life reminder
Enable or disable door/drawer alarm and duration
Enable or disable connect
Enable, disable reminder, or refresh filter life reminder
Enable or disable Sabbath mode
Adjust soft on lighting and accent lighting (if applicable)
Adjust temperature units
C
Adjust alarm volume and tone
Select language
View troubleshooting and service information
S TO RA GE
Keeping Food At Its Best
DU AL RE F RIG E RAT IO N
on either external This Sub-Zero features a unique Dual Refrigeration
to keep food fresher longer. Three separate controls allow
the refrigerator, refrigerator drawer(s), and freezer to be set
at different temperatures.
With the Sub-Zero Dual Refrigeration
refrigerator and freezer systems have been designed to
maintain accurate, consistent temperatures and proper
humidity levels for longer food life expectancy. Dual Refrig-
eration ® eliminates transfer of fresh food odors to frozen
food and ice and does not freeze the moisture out of the air
in the fresh food section.
For handy tips and information on how to maximize food
freshness, refer to the freshness cards stored in the
refrigerator.

Refrigerator Storage

® GL A S S S HE LV ES
®
system To remove or adjust a glass shelf, tilt up, then lift up and out.
To reposition, insert the shelf in the tracks along the back
wall, then lower the front until it locks into position. Refer to
the illustration below.
® system, individual IMPORTANT NOTE:
prevent breakage or scratching of the interior.
CAUTION
Warm glass shelves to room temperature before
immersing in warm water.
SL ID E-O UT B IN S
Integrated rails mounted below the glass shelves allow
slide-out bins to be positioned in a variety of locations. To
remove or adjust a slide-out bin, pull the handle of the bin
forward until it stops, and lift up and out of the rails. Refer to
the illustration below.
Glass shelf removal
Use care when handling glass shelves to
Slide-out bin removal
|
subzero.com 5