Electronic Controls; Storage - Sub-Zero PRO 48 Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
ELECT R ON I C C O N T ROLS
Control Panel
F U N C TI O N
Adjusts tem per ature in one-degree increments
COLDER
for the refrigerator, refrigerator drawers and
WARMER
freezer. Temper atures are preset at 3°C and
-18°C.
ICE MAKER Turns power to ice maker on or off. Use to
disable ice maker during extended vacations.
Turns unit on or off. When power is off, 'OFF'
POWER
will appear in the external display. Turning power
off at the control panel eliminates the need to
unplug or turn power off at the circuit breaker
during service or extended vacations.
Activates or deactivates door alarm. An audible
ALARM
chime indicates door has been left ajar for more
than 30 seconds.
Turns interior accent lighting on or off for glass
LIGHT
door model.
Control panel (glass door model).
Freezer external display.
Refrigerator external display.
External Display
FUNCTI ON
Indicates freezer temperature.
Indicates refrigerator temperature.
Indicates refrigerator drawers temperature.
Illuminates when ice maker system is activated.
Illuminates when door alarm is activated.
SERVICE
Illuminates or flashes when electronic control system
has detected a temperature or ice maker problem, or
if the condenser needs to be cleaned.
COLDER
S TO R AGE
Keeping Food At Its Best
This Sub-Zero features a unique dual refrigeration system
to keep food fresher longer. Three separate controls allow
the refrigerator, refrigerator drawers and freezer to be set at
different temperatures.
With the Sub-Zero dual refrigeration system, individual
refrigerator and freezer systems have been designed to
maintain accurate, consistent temperatures and proper
humidity levels for longer food life expectancy. Dual refrig-
eration eliminates transfer of fresh food odors to frozen
food and ice and does not freeze the moisture out of the
air in the fresh food section.
Refrigerator Storage
GL A S S S HE LV ES
To remove or adjust a glass shelf, tilt up, then lift up and out.
To reposition, insert shelf in the tracks along the back wall,
then lower the front until it locks into position. Refer to the
illustration below.
IMPORTANT NOTE:
Use care when handling glass shelves to
prevent breakage or scratching the interior.
CAUTION
Glass shelves should warm to room temperature before
immersing in warm water.
SL ID E-O UT B IN S
Integrated rails mounted below the glass shelves allow
slide-out bins to be positioned in a variety of locations. To
remove or adjust a slide-out bin, pull the handle of the bin
forward until it stops, lift up and out of the rails. Refer to the
illustration below.
Glass shelf removal.
Slide-out bin removal.
subzero.com
|
5

Publicité

Table des Matières
loading

Table des Matières