Specific Installations; Gate Section Limit Stops On The Ground; Electrical Connections - SOMFY HOME MOTION IXENGO L Manuel D'installation

F
E
I
P
After fitting the mounting bracket, insert the drive rod and attach it using ring I.

Specific installations

Installation with a niche in a fence Installation with a niche in a gate post

Gate section limit stops on the ground

Check for the presence of the gate section limit stops J on the ground.
For the motor drive unit to operate correctly, using limit stops on the ground is required for both the opening and closing
directions.
The ends stops in the ground apply physical pressure to the gate leaves, thus limiting the mechanical stress on the
cylinders (particularly in windy conditions).

Electrical connections

Make the connections between the motor drive unit and FX 230 electronic controller for Ixengo L 230 V.
7
Copyright © 2009 Somfy SAS. All rights reserved.