Ivoclar Vivadent Bluephase 20i Mode D'emploi page 11

Curing program
TURBO Program
Consistently high light intensity for
the polymerization of restorative and
cementation materials for direct and
indirect restorations.
2.000 mW/cm
2
0 t [s]
HIGH POWER Program
Consistently high light intensity for
the polymerization of restorative and
cementation materials for direct and
indirect restorations.
1.200 mW/cm
2
0 t [s]
LOW POWER Program
Reduced light intensity with reduced
heat development for the polymeriza-
tion of adhesives, liners, and restora-
tive materials in areas near the pulp
when restoring Class V cavities.
650 mW/cm
2
0
t [s]
SOFT START Program
Step-by-step increase of the light
intensity with reduced shrinkage
stress and reduced heat development
for the polymerization of restorative
materials.
1.200 mW/cm
2
650 mW/cm
2
0 5 t [s]
1) Applies to a maximum layer thickness of 2 mm and provided that the Instructions for Use of the respective material do not state any other recommendation (might be the case, e.g. with dentin shades)
2) Applies to a maximum layer thickness of 4 mm and provided that the Instructions for Use of the respective material do not state any other recommendation (might be the case, e.g. with dentin shades)
3) Applies to a maximum layer thickness of 3 mm 4) Applies to light-curing (use of the base past only)
Light intensity
Exposure time for composites
Exposure time for Tetric EvoCeram / IPS Empress Direct
Filling materials
Composite
• 2 mm
1)
IPS Empress Direct / IPS Empress Direct Flow /
Tetric EvoCeram / Tetric EvoFlow / Tetric /
Tetric Basic White / Tetric N-Ceram / Tetric N-Flow
Heliomolar / Heliomolar HB / Heliomolar Flow / Others
• 4 mm
2)
Tetric EvoCeram Bulk Fill
Tetric Basic White
Compomer
3)
Compoglass F / Compoglass Flow
Indirect restorations / Luting materials
Variolink II Base / Variolink Veneer / Variolink N Base
4)
/ Variolink N Clear Veneer / Variolink Ultra
Dual Cement / Variolink II
5) 5)
Miscellaneous
Heliosit Orthodontic
Telio Add-On Flow
Telio Stains
IPS Empress Direct Color
IPS Empress Direct Opaque
Filling materials
Composite
• 2 mm
1)
IPS Empress Direct / IPS Empress Direct Flow /
Tetric EvoCeram / Tetric EvoFlow / Tetric /
Tetric Basic White / Tetric N-Ceram / Tetric N-Flow
Heliomolar / Heliomolar HB / Heliomolar Flow / Others
• 4 mm
2)
Tetric EvoCeram Bulk Fill / Tetric Basic White
Compomer
3)
Compoglass F / Compoglass Flow
Indirect restorations / Luting materials
Variolink II Base / Variolink Veneer / Variolink N Base
4)
/ Variolink N Clear Veneer / Variolink Ultra
Dual Cement / Variolink II
5) 5)
Miscellaneous
Helioseal / Helioseal F / Helioseal Clear
Monopaque
MultiCore Flow / Multicore HB
Heliosit Orthodontic
Telio Add-On Flow
Telio Stains
IPS Empress Direct Color
IPS Empress Direct Opaque
Adhesive
AdheSE / AdheSE One F
ExciTE / ExciTE DSC
Tetric N-Bond / Tetric N-Bond Self-Etch
Heliobond (Syntac)
Temporary materials
Telio CS Inlay/Onlay
Systemp.inlay/onlay
Fermit / Fermit N
Telio CS Link / Systemp.link
Miscellaneous
Heliosit Orthodontic
Vivaglass Liner
Filling materials
Composite
• 2 mm
1)
IPS Empress Direct / IPS Empress Direct Flow /
Tetric EvoCeram / Tetric EvoFlow / Tetric /
Tetric Basic White / Tetric N-Ceram / Tetric N-Flow
Heliomolar / Heliomolar HB / Heliomolar Flow / Others
• 4 mm
2)
Tetric EvoCeram Bulk Fill / Tetric Basic White
Compomer
3)
Compoglass F / Compoglass Flow
5) Applies to dual-curing
2,000 – 2,200 mW/cm
2
10 s
5 s
Curing time
5 s
2x 5 s
5 s
2x 5 s
2x 5 s
per mm ceramic:
4)
/ 1x 5 s per segment
5)
2x 5 s
2x 5 s
5 s
5 s
2x 5 s
Curing time
10 s
15 s
10 s
20 s
per mm ceramic:
4)
/ 10 s per segment
5)
10 s
20 s
20 s
10 s
15 s
10 s
10 s
20 s
Curing time
10 s
10 s
10 s
10 s
20 s per segment
20 s
20 s
Curing time
15 s
20 s
15 s
20 s
15