Publicité
Les langues disponibles
Les langues disponibles
W O L F
M O D U L E
IMPORTANT NOTE: Removal of the steamer
module should only be performed by a Wolf
service center technician.
If removing the steamer module is necessary
for cleaning or service, first disconnect the
electric supply. Remove the mounting brackets
on each side of module and remove. To
reinstall, refer to page 11.
The module must be disconnected from
power prior to removal and service.
12
S T E A M E R M O D U L E
R E M O VA L
T R O U B L E
S H O O T I N G
IMPORTANT NOTE: If the steamer module
does not operate properly, follow these
troubleshooting steps:
Verify that power is being supplied to the
module.
Check electrical connections to ensure that
the installation has been completed
correctly.
Follow troubleshooting procedures as
described in the Wolf Steamer Module
Use & Care Information.
If the module still does not work, contact
your Wolf dealer or regional distributor. Do
not attempt to repair the cooktop module
yourself.
Publicité
