Registering A Bluetooth Device; Using Your Modem Adaptor With Bluetooth Function - Sony DCR-IP55 Mode D'emploi

Overview of the Bluetooth wireless technology

Registering a Bluetooth device

This section describes making a registration of a Bluetooth device. Here we describe the
procedure for registering the Sony Modem Adaptor with Bluetooth Function. Once the
registration is completed, your camcorder can connect to your Bluetooth device without
reregistering the device. You can register up to three Bluetooth devices. Also, refer to
the operating instructions supplied with your Bluetooth device.
For more information about Bluetooth devices compatible with your camcorder, access
the following URL:
For customers in Canada
"http://www.sony.ca/service/"
For customers in the areas other than in Canada
"http://www.css.ap.sony.com/"
Notes
•When using Sony BTA-NW1/BTA-NW1A Modem Adaptor with Bluetooth Function,
place it at a location that has no obstacles between your camcorder and the device.
The distance between the devices must be within 10 m (33 feet).
•The connection may be interrupted depending on the communication conditions.

Using your Modem Adaptor with Bluetooth Function

1 Preparing the Modem Adaptor with Bluetooth Function
Set the Modem Adaptor with Bluetooth Function to connection standby (BONDING).
For details, refer to the operating instructions supplied with your Modem Adaptor with
Bluetooth Function.
18
-GB