Registering Your Password - Sony DSR-PD150 Mode D'emploi

Registering your password

You have to register your password (maximum eight digits) before using the auto logo
insert function. Once you set your password, you need to enter your password to
access LOGO INS in the menu setting, and to set, change, or deactivate the setting.
(1) DSR-PD150/PD150P/PD170/PD170P: While holding down MEMORY MIX, set
(2) DSR-PD150/PD150P/PD170/PD170P: Press MENU to display the menu.
(3) Turn the SEL/PUSH EXEC dial to select
(4) Turn the SEL/PUSH EXEC dial to select LOGO INS, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select NEW ENTRY, then press the dial.
(6) Turn the SEL/PUSH EXEC dial to select the desired character, then press the dial.
(7) Repeat step 6 to enter characters into other columns.
(8) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
4
the POWER switch from OFF (CHG) to CAMERA. Keep pressing MEMORY
MIX for about five seconds.
DSR-250/250P: Set the MEMORY/CAMERA/VTR selector to MEMORY and
while holding down MEMORY MIX, set the POWER switch to ON. Keep
pressing MEMORY MIX for about five seconds.
DSR-250/250P: Push the CUSTOM PRESET/MENU switch in the MENU
direction and release it to display the menu.
The character you select is entered, and the cursor moves to the next column.
, then press the dial.