IKRA BT 2335 Manuel D'utilisation page 17

Petrol grass trimmer
INTRODUCTION
Thank you for your purchasing a brush cutter provided by our company. These Operating Instructions explains
the correct handling and operation of your brush cutter. Read these Operating Instructions carefully before
operating the device, operate the device correctly and always pay attention to operate the device in a safe way.
Please note that due to technical changes some of the actual specifications of your device may differ from those
given in these Operating Instructions.
RATINGS
MODEL
Main unit Power transmission
Maximum speed of gear shaft /
engine speed (r/min)
Idle speed (r/min)
Vibration level at handle (m/s²)
Sound pressure value [dB(A)]
Acoustic capacity level L
Direction of rotation of the cutting head
Type of handle
Cutting radius (cm)
Cord diameter (mm)
Overall cord length (m)
Cord extension
Engine Designation
Type
Displacement (cm³)
Max. output (kW at r/min)
Carburettor type
Ignition
Starter type
Fuel type
Fuel tank capacity (l)
Fuel consumption (g/kWh)
Dry weight (kg)
Length of main tube (mm)
Length of drive shaft (mm)
Technical data are subject to change without notice.
Specifications, descriptions and illustrative material in these Operating Instructions correspond to current knowl-
edge at the time of publication and are subject to change without notice. Illustrations may display optional equip-
ment and accessories, and may not include all standard equipment.
Please do also consider any local regulations
concerning noise protection !
SAFETY RULES & PRECAUTIONS
The safety rules and precautions applicable in each
case must be observed. As all power-driven devices,
also this device must be handled and operated using
appropriate care. DO NOT EXPOSE YOURSELF OR
OTHERS TO DANGER. Follow the general rules given
in these Operating Instructions. Do not allow other per-
sons to use this device unless they act in a responsible
manner and have read and understood the Operating
Instructions and are familiar with its operation.
• Always wear safety goggles for eye protection.
Dress properly, do not wear loose clothing or jewel-
BT 2335
direct connection, flexible shaft
7500
3450 ±150
< 15 ISO 7916
< 102 EN 27917
< 120 ISO 10884
dB(A)
WA
right-hand rotation (seen from the top)
"D" grip
40
1.8
2 x 2.5
Tap'n go
1E32F-2
air-cooled, 2-cycle, vertical piston valve, spark ignition engine
21,4
> 0.5/6500
diaphragm-type
contactless electronic ignition
recoil starter
2-stroke mixture (25:1)
0.35
< 740
3,5
1250
1330
lery that may get caught in moving parts of the unit.
Always wear safe, sturdy, antiskid footwear. Long
hair should be tied back. It is recommended that the
legs and feet are covered during operation to pro-
tect them from thrown objects.
• Inspect the entire device for loose parts (nuts, bolts,
screws, etc.) and any damage. Repair or replace the
device/parts as necessary before using the device.
• DO NOT USE any attachments with this power-
driven device other than those recommended by the
manufacturer/seller. Otherwise serious injury may
occur to the operator or bystanders and the device
may be damaged.
• Keep the handles free from lubricants and fuel.
GB-2