Maintenance; Replacing The Oil; Cleanliness; Replacement Parts - SKF 729124 Mode D'emploi

4. Maintenance

4.1 Replacing the oil

When replacing the oil or after maintenance, make
sure no air is trapped in the system. This should be
checked before attaching the hose to the application
by making sure only air-free oil comes out of the
hose when pumping. Only use clean, recommended
hydraulic oils.

4.3 Replacement parts

Designation
729108
729124–1
729124–3
729124–4
729124–5
729831 A
729832 A
729126
1077587/2
THGD 100
729124–CC
Items marked* are ONLY for 729124 DU.

4.4 Accessories

Designation
LHMF 300/5
LHDF 900/5
The contents of this publication are the copyright of the
publisher and may not be reproduced (even extracts) unless
prior written permission is granted. Every care has been
taken to ensure the accuracy of the information contained in
this publication but no liability can be accepted for any loss or
damage whether direct, indirect or consequential arising out of
the use of the information contained herein
6
EN

4.2 Cleanliness

Keep the pump clean from dirt and metal particles
in order to avoid excessive wear.
Description
Gauge nipple
Hand-pump (sub-assembly)
Repair kit
Release knob and spindle
Oil container tube
Quick connection coupling, G
Quick connection nipple, G
High pressure hose
Pressure gauge (100 MPa, 63 mm)
Digital oil pressure gauge*
Toolcase with inlay for 729124
Description
Mounting fluid (5 litre, 300 mm
Dismounting fluid (5 litre, 900 mm
1 /
4
/
1
4
2 /s at 20 °C)
/s at 20 °C)
2