Clock Functions - Zanussi ZOB35301 Notice D'utilisation

Clock functions

Electronic programmer
1
5
Clock function
Time of day
Minute Minder
Duration
End
You can use Duration
the same time to set the time when the ap-
pliance must be activated and then deactivated.
First set Duration
Setting the clock functions
1. For Duration
function and temperature. This is not nec-
essary for the Minute Minder
2. Press the Selection button again and again
until the indicator for the necessary clock
function flashes.
www.zanussi.com
2 1
4 3
To set, change or check the time of day.
To set a countdown time. This function has no effect on the operation of
the oven.
To set how long the appliance must operate.
To set when the appliance must be deactivated.
and End
, then End .
and End , set an oven
.
Function indicators
1
Time display
2
Button +
3
Selection button
4
Button -
5
Application
at
3. Press + or - to set the time for the neces-
sary clock function.
The display shows the indicator for the
clock function you set. When the set time
ends, the indicator flashes and an acoustic
signal sounds for two minutes.
With the Duration
tions, the appliance deactivates automati-
cally.
and End func-
7