Clock Functions - Zanussi ZOB65301 Mode D'emploi

BUTTONS
Button

CLOCK FUNCTIONS

CLOCK FUNCTIONS TABLE
Clock function
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER
SETTING AND CHANGING THE TIME
You must set the time before you operate the oven.
The flashes when you connect the appliance to
the electrical supply, when there was a power cut
or when the timer is not set.
Press the or to set the correct time.
After approximately five seconds, the flashing stops
and the display shows the time of day you set.
To change the time of day press
again until starts to flash.
SETTING THE DURATION
1. Set an oven function and temperature.
2. Press again and again until
flash.
3. Press or to set the DURATION time.
The display shows
8
Function
MINUS
CLOCK
PLUS
Plus Steam
To set, change or check the time of day.
To set how long the appliance operates.
To set when the appliance deactivates.
To combine DURATION and END function.
To set countdown time. This function has no effect on the opera-
tion of the appliance.
again and
starts to
.
Description
To set the time.
To set a clock function.
To set the time.
To activate the True Fan Cooking PLUS func-
tion.
Application
4. When the time ends,
acoustic signal sounds. The appliance
deactivates automatically.
5. Press any button to stop the acoustic signal.
6. Turn the knob for the oven functions and the
knob for the temperature to the off position.
SETTING THE END
1. Set an oven function and temperature.
2. Press again and again until
flash.
3. Press or to set the time.
The display shows
4. When the time ends,
acoustic signal sounds. Press any button to
stop the signal.
5. Turn the knob for the oven functions and the
knob for the temperature to the off position.
flashes and an
starts to
.
flashes and an