Clock Functions - Zanussi ZOB35301BK Notice D'utilisation

Display
A
Buttons
Button

Clock functions

Clock functions table
Clock function
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER
Setting and changing the time
You must set the time before you operate the
oven.
The flashes when you connect the appliance
to the electrical supply, when there was a
power cut or when the timer is not set.
Press the or to set the correct time.
After approximately five seconds, the flashing
stops and the display shows the time of day you
set.
www.zanussi.com
B C
Function
MINUS
CLOCK
PLUS
To set, change or check the time of day.
To set how long the appliance operates.
To set when the appliance deactivates.
To combine DURATION and END function.
To set countdown time. This function has no effect on the operation
of the appliance.
A. Function indicators
B. Time display
C. Function indicator
Description
To set the time.
To set a clock function.
To set the time.
Application
To change the time of day press
again until starts to flash.
Setting the DURATION
1. Set an oven function and temperature.
2. Press again and again until
flash.
3. Press or to set the DURATION time.
The display shows
again and
starts to
.
7