Annex - LUTZ B2 Vario PP 32-SL Manuel D'utilisation

en

10. Annex

Pump
Immersion 19"
depth
500 mm 700 mm
Max.
capacity
1)
Max. head
1)
Max. tempe-
5 °F up to 122 °F
rature of the
liquid being
-15 °C up to +50 °C
pumped
Max. viscosity
Specific
gravity
Wetted parts PP, PVDF, Hastelloy C, FPM,
Weight 4.9 lbs
2.2 kg
1) The maximum flow rate is a value determined by means of a test bench and measured with water at a medium
temperature of approx. 68°F/20°C. The measurement is carried out at the pressure joint of the pump, without
hose, nozzle or flow meter. The flow rate achievable in use is lower and depends on the individual application,
the media properties and the configuration of the pump. The max. delivery head is also dependent on the pump
design, motor and medium.
Tab. 7: Technical data of pump
Motor
Voltage
Frequency
Power
Rated current
Protection class
Type of protection
Absolute humidity
Noise level
Acceleration due to vibrations
Tab. 8: Technical data of motor
Lutz B2 Vario
PP 32-R-SL
27" 39"
1000
mm
19 GPM
71 l/min
22 ft.
6.7 m wc
300 cps
1.3
PTFE, ETFE
5.1 lbs 5.5 lbs
2.3 kg 2.5 kg
110-120V/60Hz
2 up to 25 g/m³
Lutz B2 Vario
PVDF 32-R-SL
19" 27" 39"
500 mm 700 mm 1000
mm
19 GPM
71 l/min
22 ft.
6.7 m wc
5 °F up to 194 °F
-15 °C up to +90 °C
300 cps
1.3
PVDF, Hastelloy C, FPM,
PTFE, ETFE
5.1 lbs 5.3 lbs 5.7 lbs
2.3 kg 2.4 kg 2.6 kg
Lutz B2 Vario
110-120 V
60 Hz
180 W
1.7 A
II
IP24
< 70 dB(A)
< 2.5 m/s²
Lutz B2 Vario
SS 28-R-SL
19" 27" 39"
500 mm 700 mm 1000
mm
17 GPM
65 l/min
21 ft.
6.4 m wc
5 °F up to 122 °F
-15 °C up to +50 °C
300 cps
1.3
Stainless steel (1.4571),
FPM, PTFE, ETFE
6.4 lbs 6.8 lbs 7.7 lbs
2.9 kg 3.1 kg 3.5 kg
11