Installation - Agilent Technologies TV 902 Navigator Notice De Mode D'emploi

Installation

Do not remove the adhesive and protective cap before connecting the turbopump
CAUTION!
to the system.
Install this device only in indoor ambient and in any case don't use in
an environment exposed to atmospheric agents (rain, snow, ice),
dust, aggressive gases, or in explosive environments or those with a
high fire risk.
During operation, the following environmental conditions must be
respected:



In the presence of magnetic fields the pump must be protected using
a ferromagnetic shield. See the appendix "Technical Information" for
detailed information.
The TV 902 Navigator must be connected to a primary pump (see
"Technical Information").
TV 902 Navigator User Manual / 87-900-999-01 (B)
maximum pressure: 2 bar above atmospheric pressure
temperature: from +10 °C to +35 °C
relative humidity: 0 – 90 % (non-condensing)
Instructions for Use

Installation

229/276
16