Dispensing Hot Water - Melitta CAFFEO SOLO & Perfect Milk Guide D'utilisation

10

Dispensing hot water

Prerequisite: the appliance must be ready for operation (see „switching on
and off" on page 56).
• Turn the control dial (Fig. F, No. 3) to the „Hot water" position.
The „Hot water" function is active when the
dial points upwards.
• Hold a vessel under the Cappuccinatore.
Warning!
there is a risk of burn injuries and scalding due hot water splashing and
the hot steam pipe.
When dispensing hot water directly after dispensing steam, the remaining
steam will initially escape from the Cappuccinatore and can cause the hot
water to splash.
– Avoid direct skin contact with hot water and the hot Cappuccinatore.
• Turn the valve switch (Fig. A, No. 11) clockwise to the stop to open the
valve.
→ The valve symbol
Cappuccinatore and into the vessel.
• As soon as the desired quantity of water is reached, turn the valve
switch anti-clockwise to the stop to close the valve.
Notes
Water dispensing ends automatically when approx. 150 ml of hot water have
been dispensed. If you would like to dispense a larger quantity of water,
turn the valve switch back to its original position and repeat the hot water
dispensing process.
now fl ashes. Hot water fl ows out of the
symbol on the control
63