Parallel Operation Information; Ups Position; Master / Slave Priority - LEGRAND KEOR HP Série Manuel De L'utilisateur

Sub-menu
SERIAL NUMBER
DEVICE TYPE
PARALLEL
(1)
MODBUS
FIRMWARE RELEASE
SERVICE
RUNNING HOUR
(1)
the menu is only active if the UPS belongs to a Parallel or Load Sync system
7.1

PARALLEL OPERATION INFORMATION

The PARALLEL menu is only active if the UPS belongs to a parallel or load-sync system.

7.1.1 UPS position

The first number on the second line identifies the position of that specific UPS within the
parallel system. The second number represents the total number of UPS units.

7.1.2 Master / Slave priority

The string on the second line may have two values, "MASTER" or "SLAVE". Only one
MASTER UPS can be present in the system; if not there will be a conflict on the data
communication bus.
UPS user manual
Manuel de l'utilisateur de l'UPS
Utilizzo dell'UPS
Displayed data
Device serial number given by the manufacturer and
by an OEM distributor, if any
The device type can be:
 ON LINE - UPS
 FREQUENCY CONVERTER
 ECO MODE - UPS
 SINGLE UPS
 PARALLEL
Data regarding the parallel configuration
MODBUS address of device
Firmware versions installed on the system
Scrolling text string with information regarding
technical service
Dates related to hours number of UPS running time
PARALLEL
2 / 6
PARALLEL
MASTER
OMD10074 REV. C 35