Parallel Operation Information; Ups Position; Master / Slave Priority - LEGRAND KEOR HPE 60 Manuel De Fonctionnement

Sub-menu
SERIAL NUMBER
DEVICE TYPE
PARALLEL
PARALLEL/RECTIFIER
MODBUS
FIRMWARE RELEASE
SERVICE
RUNNING HOURS
(1)
the menu is only active if the UPS belongs to a Parallel or Load Sync system
(2)
the menu is only active if the UPS belongs to a common battery system

PARALLEL OPERATION INFORMATION

The PARALLEL menu is only active if the UPS belongs to a parallel or load-sync system.

7.1.1 UPS position

The first number on the second line identifies the position of that specific UPS within the parallel system.
The second number represents the total number of UPS units.

7.1.2 Master / Slave priority

The string on the second line may have two values, "MASTER" or "SLAVE". Only one MASTER UPS can
be present in the system; if not there will be a conflict on the data communication bus.
40 OMW07104 REV. A
UPS user manual
Manuel de l'utilisateur de l'ASI
Utilizzo dell'UPS
Displayed data
Device serial number given by the manufacturer and
by an OEM distributor, if any
The device type can be:





(1)
Data regarding the parallel configuration
(2)
Data regarding the parallel rectifier configuration
MODBUS address of device
Firmware versions installed on the system
Scrolling text string with information regarding
technical service
Dates related to hours number of UPS running time
ON LINE - UPS
FREQUENCY CONVERTER
ECO MODE - UPS
SINGLE UPS
PARALLEL
PARALLEL
2 / 6
PARALLEL
MASTER