Selecting Heating And Cooling Modes; Temperature Settings - Conrad 61 05 78 Mode D'emploi

b) Selecting Heating and Cooling Modes
• Press the „
• Press „ " repeatedly to switch between heating mode (display „HEAT") and cooling
mode (display „COOL").
• Briefly press „
Heating mode:
The relay is activated if the measured temperature falls below a set temperature threshold.
The display shows „
Cooling mode:
The relay is activated if the measured temperature rises above a set temperature
threshold. The display shows „
c) Temperature Settings
Three control temperatures are available that are later used for temperature monitoring of
the room thermostat:
Normal temperature value
Temperature value for night temperature reduction
Temperature value for energy saving
Proceed as follows to set the 3 temperatures:
• Press „ " repeatedly to select one of the three control temperatures. The display
shows the respective symbol „
be set.
• Change the temperature with the buttons „
down the respective button for quick setting of the temperature value.
• Briefly press „
36
" button. The year flashes.
" to confirm the settings. The device leaves the setting mode.
".
".
" to confirm the settings. The device leaves the setting mode.
", „ " or „ " for the temperature that can currently
" and „ " (in steps of 0.5 °C). Hold