Selecting Mode Of Operation; Manual Temperature Setting - Conrad 61 05 78 Mode D'emploi

f) Selecting Mode of Operation
Press „ " repeatedly to either activate automatic operation or set the room thermostat
to maintain one of the temperature values set in Chapter 11. c).
The respective symbols are displayed above the bar display.
1. Automatic operation
The symbol „
temperature value (depending on the programmed temperature curve and current time
of the day). The room thermostat now controls the room temperature depending on the
temperature curve programmed by you.
2. Frost protection
The „ " symbol appears to the right of the time/temperature display

This function is only available if the room thermostat is in heating mode (see
Chapter 11. b).
3. Normal temperature value
Symbol „ " is displayed above the bar display
4. Temperature value for night temperature reduction
Symbol „ " is displayed above the bar display
5. Temperature value for economic operation
Symbol „ " is displayed above the bar display
g) Manual Temperature Setting
This function can be used if you want to increase or lower the temperature for a short time
as compared to the one indicated by the temperature curve you programmed.
• Set the desired temperature manually with „
hold down the corresponding button for an extended period of time.
„ " is displayed.
• Confirm the setting with „

To return to automatic operation, press „
Manual temperature indication is ended automatically if there is any change in
the programmed temperature curve (e.g. from normal to night operation).
40
" is displayed above the bar display, as well as the symbol for the current
".
" and „ ". For quick adjustment,
". The symbol „ " disappears.