Conrad 61 05 78 Mode D'emploi page 38


The room thermostat also has a copy function, e.g. if you want to assume the
temperature curve from Monday for Tuesday or Friday. Observe Chapter 11.e).
Programming may look as follows:
00
00:00:00 to 06:00:00 hours
06:00 to 00:00 hours
09:00 to 17:00 hours
17:00 to 24:00 hours
In heating mode, programme the normal temperature value e.g. to 22°C, night reduction
to 18°C and the temperature value for economic operation to 20°C. This reduces the
temperature at night and increases it in the morning and evening. During the day (while you
are at work), the temperature is reduced to save energy, but your apartment will not cool
off as much.
Cooling mode, of course, requires precisely opposite temperatures. When operating air
conditioning, the normal temperature value is set, e.g., to 22°C, night reduction to 26°C and
the temperature value for economic operation to 24°C. At the respective temperatures, the
air conditioning will operate at full performance during the morning and evening, the
apartment will not heat up too much during the day, and the noise of the activated air
conditioning will only disturb your night if the temperature increases too strongly.
38
06
Temperature value for night temperature reduction
(e.g. 18°C)
Normal temperature (e.g. 22°C)
Temperature value for economic operation
(e.g. 20 °C)
Normal temperature (e.g. 22°C)
12 18 24