Switching On The Appliance - BORETTI BKV-179 Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

instructions. You should supervise children to prevent them from
playing with the appliance.
• If the power cord is damaged, it should be replaced by an authorized service
technician.
• The appliance is not intended for use by people (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children should be supervised
to ensure that they don't play with the appliance.
• If the supply cord is damaged it must be replaced by the manufacturer or service
agent or similary qualified people in order to avoid a hazard.

Switching On the Appliance

• Before switching on, place the appliance on upright position
and wait at least three hours without moving the appliance.
This will give the refrigerant circuit time to settle and operate
efficiently.
• Clean the appliance thoroughly, especially in the interior, before use (See
Cleaning and Maintenance).
• Installation of the appliance and electrical connections must
be carried out by a qualified technician, in accordance with
the Installation Manual and local regulations.
• Installation procedure into the kitchen unit is given in the
Installation Manual. This product is intended to be used in
proper kitchen units only.
• The appliance must be connected with a properly installed
fused socket. Power supply (AC) and voltage at the
operating point must with the details on the name plate of
the appliance (name plate is located on the inside left of the
appliance).
• Insert the plug into a socket with an efficient ground
connection. If the socket has no ground contact or the plug
does not match, we suggest you to call an authorized
electrician for assistance.
• If the supply cord is damaged, It must be replaced by an
appointed service agent or similarly qualified person in order
to avoid a hazard
• Manufacturer is not responsible for failure to complete the ground
connection as described in this booklet.
• There can be an odor when you first switch on the appliance. It will
disappear after the appliance starts to cool.

Publicité

Table des Matières
loading

Table des Matières