Switching On The Appliance; How To Operate The Appliance; Thermostat Setting - BORETTI BR-83 Notice D'emploi

Switching On the Appliance

• Before switching on, place the appliance on upright position and
wait at least three hours without moving the appliance. This will
give the refrigerant circuit time to settle and operate efficiently.
• Clean the appliance thoroughly, especially in the interior, before use (See Cleaning
and Maintenance).
• Installation of the appliance and electrical connections must be
carried out by a qualified technician, in accordance with the
Installation Manual and local regulations.
• Installation procedure into the kitchen unit is given in the
Installation Manual. This product is intended to be used in
proper kitchen units only.
• The appliance must be connected with a properly installed fused
socket. Power supply (AC) and voltage at the operating point
must with the details on the name plate of the appliance (name
plate is located on the inside left of the appliance).
• Insert the plug into a socket with an efficient ground connection.
If the socket has no ground contact or the plug does not match,
we suggest you to call an authorized electrician for assistance.
• Manufacturer is not responsible for failure to complete the
ground connection as described in this booklet.
• There can be an odor when you first switch on the appliance. It will disappear after the
appliance starts to cool.
• The plug must be accessible after installation.
PART 2. HOW TO OPERATE THE APPLIANCE

Thermostat Setting

4