Switching On The Appliance - BORETTI BKVD-179 Notice D'emploi

Switching On the Appliance

• Installation of the appliance and electrical
connections must be carried out by a quali-
fied technician, in accordance with the Instal-
lation Manual and local regulations.
• Installation procedure into the kitchen unit is
given in the Installation Manual. This product
is intended to be used in proper kitchen units
only.
54
• Before switching
on, place the ap-
pliance on upright
position and wait at
least three hours
without moving the
appliance. This will
give the refrigerant
circuit time to set-
tle and operate ef-
ficiently.
• Clean the appliance
thoroughly, especially
in the interior, before
use (See Cleaning
and Maintenance).
• The appliance must be connected with a
properly installed fused socket. Power supply
(AC) and voltage at the operating point must
with the details on the name plate of the ap-
pliance (name plate is located on the inside
left of the appliance).
• Insert the plug into a socket with an effi-
cient ground connection. If the socket has no
ground contact or the plug does not match,
we suggest you to call an authorized electri-
cian for assistance.
• If the supply cord is damaged, It must be
replaced by an appointed service agent or
similarly qualifi ed person in order to avoid a
hazard
• Manufacturer is not responsible for failure
to complete the ground connection as de-
scribed in this booklet.
• There can be an odor when you first switch
on the appliance. It will disappear after the
appliance starts to cool.