Setting Date And Time - LEGRAND KEOR HPE Manuel De Fonctionnement

 Changes to the operating parameters and starting operations on the UPS may
be potentially dangerous for the device and for persons.

5.4.1 Setting date and time

Date and time may be set via the CLOCK page.
Picture 21 – Clock manual setting
Setting the current date and time correctly
The correct setting of the date and time is essential for the recording of the event log.
The system also allows the setting of a NTP server for the synchronization of date and time.
Such configuration mode is enabled by pressing the label Disabled. As the NTP server is
enabled the data can't be manually entered anymore.
36 OMP06263 REV. B
UPS user manual
Manuel de l'utilisateur de l'ASI
Utilizzo dell'UPS