Medtronic Guardian Connect Manuel D'utilisation Et D'applications page 27

Logbook
The Logbook screen displays a history of alerts and events that occurred on the
selected day, with the most recent entries at the top of the list.
To view Logbook entries:
1 On the Guardian Connect Home screen, tap
2 Do any of the following to view the desired information:
• Tap Alerts or Events to filter the list by the specific type. You also can select
All to view the entire list.
• Swipe down and up on the list to view the entries.
• If you wish to delete an event entry, swipe it left and tap Delete.
Note: You cannot delete alerts and calibration events.
• Tap the desired entry to expand it and view the details. You can also use
and arrows at the top of the expanded view to scroll through the list entries.
3 If you are viewing a specific event or alert on a details screen, tap Logbook >
Home to return to the Home screen. If you are on the main Logbook screen, tap
Home to return to the Home screen.
Syncing your data to CareLink Personal
Guardian Connect allows you to sync your data to CareLink Personal automatically
or upload information for CareLink reports as needed.
This automatic Sync to CareLink feature sends data displayed in the Guardian
Connect app to the CareLink Connect tab of the CareLink Personal website
approximately every five minutes when an Internet connection to CareLink is
available. This feature also automatically sends sensor history information used to
create CareLink reports roughly every 24 hours. This information can be viewed by
you or a care partner on the CareLink Personal website at carelink.minimed.eu.
Please note that your mobile device must be connected to the Internet to send data
to CareLink. If using a cellular connection, your provider's data rates may apply.
The Sync to CareLink feature defaults to on when you set up your Guardian Connect
app. If the Sync to CareLink toggle is turned off, the app will no longer send sensor
information to CareLink Personal.
The Upload Now button allows you to immediately send sensor history data to
CareLink Personal for generating reports.
and select Logbook.
-21-