Entretien - Migatronic LTE 200 S Manuel D'instruction

ENTRETIEN

Les appareils LTE ne demandent pratiquement aucun
entretien. Un air poussiéreux, humide ou agressif peut
cependant exercer une sollicitation anormalement
sévère sur les appareils de soudage. Il convient de
procéder à la révision annuelle suivante pour garantir
un parfait fonctionnement:
- Ouvrir l'appareil et le nettoyer à l'air comprimé.
- Enlever la poussière déposée sur les ailettes du
ventilateur.
- Tester les fiches des câbles de soudage et les
changer si nécessaire.
- Vaporiser l'ensemble des connexions mécaniques
des câbles électriques avec un produit hydrofuge.
N'utiliser qu'un produit à base de silicone pour
préserver les matériaux isolants de l'appareil.
Un entretien insuffisant peut causer une sécurité de
service réduite et une suppression de la garantie.
WARRANTY
All MIGATRONIC machines carry a twelve-month guarantee
against hidden defects. Such defects must be notified no
later than two months after it has been noticed. The warranty
runs for twelve months after invoicing to end customer.
The warranty covers material and manufacturing faults that
cannot be immediately acknowledged.
Lapse of warranty
The warranty covers no obvious product characteristics,
which in time are thought as being inconvenient.
Incorrect installation
The warranty does not cover defects due to incorrect
installation of the product, e.g. connection to the wrong mains
voltage.
Incorrect or abnormal use of the product
The warranty does not cover use of the product for other
purposes than it has been designed for. If the product is
used for more than 8 hours daily, the warranty does not
cover defects due to these intensive working conditions.
Lack of maintenance
There is a lapse of warranty if the product is not properly
maintained. E.g. if the product is dirty to such a degree that
cooling is hindered. The warranty does not cover damages,
which can be traced back to unauthorised and lacking repairs
of the product.
Over loading/extreme loading
The warranty does not cover over loading or extreme
loading. Nor transport damages, damages due to incorrect
handling, drops etc. The warranty does not cover abnormal
conditions as regards temperature, moisture or environ-
mental loading above the limit, which the machine has been
designed for.
Defects due to infestants
The warranty does not cover defects due to infestants.
Wear parts
The warranty does not cover parts of the product, which is
exposed to wear and tear, e.g. the wire drive rolls. The
warranty does not cover depreciation due to normal use, e.g.
scratches, rust and mechanical damage. Welding cables and
welding hoses are regarded as wear parts and therefore not
included in the warranty.
Resulting damages
Use of the product must stop immediately after acknowledge
of a defect in order to avoid further damage of the product.
The warranty does not cover resulting damages due to use
of the product after acknowledge of a defect. Moreover, the
warranty does not cover resulting damages on other items
due to product defect.
34