Remote Controls - Migatronic LTE 200 S Manuel D'instruction

FPB (part no. 76116380)
By using the FPB remote control with the LTE 200
LEHF the machines can be used for pulsed TIG
welding.
The FPB has the following controls:
Pos. 1 Welding current potentiometer
Here the welding current is infinitely variable
and when the switch (pos.5) is in posi-
tion " ", the pulse current is set.
Pos. 2 Base current potentiometer
Here the base current for the pulsatory arc is
set when the switch (pos. 5) is in position
" ". The base current is shown as a per-
centage of the pulse current.
Pos. 3 Potentiometer for pulse current time
The duration of the pulse current is infinitely
variable between 0.03 and 2.0 seconds.
Pos. 4 Potentiometer for base current time
The duration of the base current is infinitely
variable between 0.03 and 2.0 seconds.
LEDs under the potentiometers show puls
time and base current time.
Pos. 5 Switch
Under symbols "
machine can be set at constant or pulsatory
current respectively.
REMOTE CONTROL
" and " " the
3
5
16
4
1
2