Compliance; Maintenance And Troubleshooting; Cleaning The Mixer/Controller System - Cole-Parmer SD Mode D'emploi

Compliance

Compliance of mixer system includes both the mixer motor and the controller.
Enclosure Rating (IP)
Chemical Resistance
Compliance
Environment
RoHS Restriction of Hazardous Substances (EU)
WEEE Waste Electrical and Electronic Equipment (EU)
CSA Canadian Standards Association
CE Communité European (European Community)
UKCA UK Conformity Assessed
UL Underwriters Laboratories
FCC Federal Communications Commission
IEC The International Electrotechnical Commission
ICES Interference Causing Equipment Standards
EMC Electromagnetic Compatibility
EMI Electromagnetic Interference

MAINTENANCE AND TROUBLESHOOTING

Maintenance is limited to cleaning the unit and removing the fan filter for cleaning or replacement. If
a fault is detected when troubleshooting and cannot be corrected by the suggested remedy, contact
your dealer for service.

Cleaning the Mixer/Controller System

Keep the mixer housing and controller enclosure clean with mild detergents. Never immerse or use
excessive fluid.
IP44 per IEC 60529
Exposed material is painted or anodized aluminum and ABS
CAN/CSA C22.2 No. 61010-1:2019
CAN/CSA-C22.2 No. 61010-2-051:2015
UL 61010-1:2019
UL 61010-2-051:2015
IEC 61010-1:2010, IEC 61010-2-051:2015
EN 61010-1:2010, EN 61010-2-051:2015
FCC Part 15 Subpart B, Class A
ICES-003:2020
IEC 61326-1:2012
CISPR 11:2017
EN 61326-1:2013, EN 55011:2016
Indoors
Altitudes up to 6500 ft (2000 m)
1.
Temperatures from 41°F to 104°F (5°C to 40°C)
2.
Maximum relative humidity 80% for temperatures up to
3.
88°F (31°C) decreasing linearly to 50% relative humidity at
104°F (40°C).
Pollution Degree 2 in accordance with IEC 664
4.
19