Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions – Surface Strip Retrofit Kit (SSRK)
INSTALLATION
Items Required
Screwdriver
●
●
Safety Glasses
●
●
Gloves
●
●
Drill with ¼ Nut Driver
●
●
Wire Cutters
●
●
Installation Instructions
1.
Turn off the power at the main fuse/breaker box.
2.
Remove lens, lamps, driver/ballast cover, lamp holders and driver/ballast from existing fixture as applicable.
3.
Carefully open carton, remove gear tray from carton.
4.
The mounting brackets come in a folded position from the factory, bend the mounting brackets to roughly 75 degrees for
installation. (Figure 1.)
Mounting Bracket
Figure 1.
2
COOPER LIGHTING SOLUTIONS
Gear Tray
IB519100EN
Installation instructions
Mounting Bracket
Gear Tray
Publicité
