Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions
Define DS/RDS
(2"- 5" Housing Size)
Individual and Continuous Luminaires - Installation
Parts List
•
Fixture
•
1/4-20 Mounting Stud Or Other Hard-
ware (by others) or grid mounting
bracket(s) (provided).
•
Push In Connectors
•
Cast Joiner
Cross Section and Grid Spacing Details
1/4-20 STUD
MOUNTED TO SUPPORT
STRUCTURE (BY OTHERS)
V
W
Installation Instructions
1
Turn off power before installation. Remove fixture and components
from box. Install 1/4-20" studs (by others) or grid clips (provided) or
other mounting structure hardware (by others) at correct locations
(see submittal for dimensional details).
2
COOPER LIGHTING SOLUTIONS
1.375"
Y
X
IL508001EN
Installation instructions
•
Phillips Screw Driver (Bit)
•
6L – T15 Torx Screwdriver (Bit)
•
Rubber Mallet
•
T-15 Torx Joining Screws (2 per row fixture
connection)
All Grid
V (Flush)
Define 2
4.132
Define 3
4.567
Define 4
5.132
Define 5
5.632
2
DIFFUSER
Remove diffuser, diffuser clip, and LED tray assembly from fixture.
Disconnect power to LED tray assembly using quick disconnect.
Set LED tray assembly to the side.
Warning: Before starting any work, ensure
that all power sources are turned off. All
work must meet local/national electrical
codes and be preformed by a certified
electrician.
DW/RDW/DIW/RDIW
W (Regressed)
X
5.132
2.000
5.567
3.000
6.132
4.000
6.632
5.000
QUICK
DISCONNECT
LED TRAY
ASSEMBLY
DIFFUSER
CLIP
Y
1.680
2.680
3.680
4.680
Publicité
