Publicité
Les langues disponibles
Les langues disponibles
5.
Using 2 TEK screws, attach the gear tray tethers to the existing fixture. (Figure 2.)
Tether Cable
Figure 2.
6.
Connect all of the fixture wires to power supply wires: White to White, Black to Black and optional Blue wire for EM
version. If applicable connect Purple and Grey wires to dimming system wires (Figure 3). Use provided Green screw to
connect ground wire to existing fixture.
White Wire
LED Board Connectors
Figure 3.
Gear Tray
TEK Screw
Connectors
Black Wire
Grey Wire
Installation Instructions – Surface Strip Retrofit Kit (SSRK)
Existing Channel
Driver
Purple Wire
COOPER LIGHTING SOLUTIONS
Tether Cable
TEK Screw
Blue Wire
Red Wire
Gear Tray
IB519100EN
Installation instructions
3
Publicité
