Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions – Surface Strip Retrofit Kit (SSRK)
Tandem 8Ft Versions Of Product
Install both 4-foot gear trays just like standalone fixtures,
but before attaching the gear trays to the existing fixture
channels, connect the Blue/Red wire male connector to
Blue/ Red wire female connector from LED driver output,
to power second gear tray, as shown in (Figure 10). Secure
wires with wire clips.
Wire Clip
Connectors
Wire Clip
Blue
Secondary
Channel Cover
Figure 10.
6
COOPER LIGHTING SOLUTIONS
Driver
Purple
Primary
Channel Cover
Red
IB519100EN
Installation instructions
Grey
Publicité
