Cooper Lighting Solutions Metalux Surface Strip Retrofit Kit Instructions D'installation

IB519100EN
Installation Instructions – Surface Strip Retrofit Kit (SSRK)
Instructions d'installation – Trousse de profilé de montage en
surface pour modernisation
Instrucciones de instalación – kit de actualización de franja
luminaria para superficies (SSRK)
Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this
product must be performed by a qualified electrician. This product must be installed in accordance
with the applicable installation code by a person familiar with the construction and operation of
the product and hazards involved.
Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or
attempting any maintenance. Disconnect power at fuse or circuit breaker. Do not make or alter any
open holes in an enclosure or wiring or electrical components during kit installation.
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or any sharp
components.
Risk of Fire- Minimum 90°C supply conductors. Do not exceed input rating of original luminaire
that is being retrofitted. Housing channel dimensions should allow for mounting bracket
attachment, width min 3.5in to max 4.5in (Standard model) or 2.5in to 3.5in (NRW model) and
channel height min 1.8in.
Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.
Risk of Personal Injury- Due to sharp edges, handle with care.
Failure to comply with these instructions may result in death, serious bodily injury and property
damage.
DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind
that may arise from the improper, careless, or negligent installation, handling or use of this product.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
NOTICE: Green ground screw provided in proper location. Do not relocate.
NOTICE: Fixture may become damaged and/or unstable if not installed properly.
Note: Specifications and dimensions subject to change without notice.
ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage on
delivery receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be
filed within 15 days of delivery. All damaged material, complete with original packing must be retained.
WARNING
Brand Logo
reversed out of
black
Metalux
INS # INS #