Door Installation - Cooper Lighting Solutions LUMARK Crosstour MAXX Instructions D'installation

DOOR INSTALLATION

6. Ensure all electrical wires and connections are secured
in the back box, re-install door and tighten door screw
to 15-20 in-lbs.
MAINTENANCE
A regular maintenance schedule should be
N otee:
followed to retain optimal light output and thermal
performance. Optical lens cleaning should be
performed with a clean dry cloth to remove any
dust or other contaminants. Additional lens cleaning
should be performed with non-abrasive acrylic
cleanser. Remove any dirt, leaves, or other foreign
debris from the housing and fins. Clean water may
be used to flush the fins.
Wiring Diagrams
Connect all Ground Wires First
Without Photocontrol
Driver
Factory Wired
Driver to LED
Installation Instructions - Crosstour MAXX
Locking Hinges
Push-in
Connectors
Figure 4.
Supply Line (Black)
Load (Black)
Neutral (White)
Supply Neutral (White)
COOPER LIGHTING SOLUTIONS
IB514001EN Installation instructions
3