Private Branch Exchanges; Wall Installation - switel TE16 Mode D'emploi

Setting the date and time
The time and date are set via the menu. A detailed description is provided on Page 63.

Private branch exchanges

The information on Page 64 explains how to install your telephone in a private branch
exchange.

Wall installation

The telephone can also be installed on a wall. Two screws are necessary to fix the tele­
phone in place (screws are not included in the material supplied). Drill two holes at a
distance corresponding to the slots (35 mm apart) and insert the screws leaving ap­
prox. 5 mm projecting from the wall. Align the slots in the telephone base unit to the
screws, fit the screws in the slots and slide the telephone base unit downwards a little.
Attention: Risk of serious electric shock!
Before drilling the holes for wall installation, ensure there are no electrical
lines in the wall in the area to be drilled!
Turn the hook in the receiver cradle so that the receiver can be placed on-hook.
Starting Up
59