Auto Answer; Private Branch Exchanges; Setting The Display Language - switel DF 81 Série Mode D'emploi

Preparing the Telephone
Inserting the battery pack
Open the battery compart-
ment cover. Connect the plug
leading from the battery pack
to the corresponding socket in
the battery compartment.
Insert the battery pack in the
battery compartment. Only
use the battery pack supplied.
Pay attention that the cable is
not jammed. Close the battery
compartment cover.
Charging the battery pack
Before the handset is used for the first time, insert it in the base
station / charging station for at least 20 hours.
The handset warms up during the charging process. This is normal and
does not represent a risk. Do not charge the handset with charging units
from other manufacturers. The current battery charge status is indicated
in the display:
Full
Setting the time and date on the handset
The time and date are set via the menu. Refer to Page 83 for the
sequence of menu option selections.

Setting the display language

The display language is available in German, English, Italian and French.
Set the language using the menu. Refer to Page 82 for the sequence of
menu option selections.
74
67
Half empty Low

Auto Answer

If this function is activated, an incoming call is taken when the handset is
removed from the base station. The automatic answering function is acti-
vated and deactivated using the menu. Refer to Page 82 for the sequence
of menu option selections.

Private branch exchanges

If you want to connect the telephone to a private branch exchange, more
information is provided on Page 81.
Low−radiation operation (ECO mode)
Default setting = ECO Mode → On
In call mode, the radiation is reduced considerably when ECO mode is ac-
tivated as compared to standard, cordless DECT telephones.
If necessary, you can increase the range of the telephone system
by switching ECO mode off . Page 83 (ECO Mode → Off).
Empty