Infant Car Seat Mode; Using The Infant Car Seat Receivers - Britax B-AGILE 3 Guide De L'utilisateur

Infant Car Seat Mode

• All infant car seats MUST be installed rear facing.
• Always remove the infant car seat receivers when not in use.
Failure to do so may result in injury.
IMPORTANT: For non-Britax infant car seats, an infant car seat
adapter frame must be used. This adapter frame is sold separately at
select retailers and on us.britax.com.

Using the Infant Car Seat Receivers

Attaching the Infant Car Seat Receivers
NOTE: Receivers are marked left and right. Attach each from the
position of the occupant.
1. Lock the parking brake.
2. Unsnap the stroller seat straps from
the frame of the stroller.
3. Align the receivers with the mounts on
the inside frame of the stroller, then
push down until a click is heard. Pull
up on the receivers to ensure they are
secure.
14
4. Attach the receiver strap snaps to the
frame of the stroller, then attach the
stroller seat straps to the receiver strap
snaps.
Removing the Infant Car Seat Receivers
1. Unsnap the stroller seat straps from
the receiver strap snaps, then unsnap
the receiver strap snaps from the frame
of the stroller.
2. Press the button on the receiver and lift
upward.
3. Reattach the stroller seat strap to the
stroller frame.
CLICK
15