Using A Britax Infant Car Seat; Care And Maintenance - Britax B-AGILE 3 Guide De L'utilisateur

Using a Britax Infant Car Seat

Attaching a Britax Infant Car Seat
1. Set the parking brake.
2. Line up the adapter on the infant car
seat with the receivers on the stroller.
3. Press down until locked into place.
4. Lift up on the infant car seat to ensure
that it is secure.
Removing a Britax Infant Car Seat
Refer to your infant car seat user guide for information on the removal
instructions for your specific model.
16

Care and Maintenance

Parking Brake • Periodically check that the parking brake works
properly and locks both wheels securely.
• Clean out any dirt or debris that may prevent the
brake from working.
Frame • Wipe the frame with a damp cloth and mild
soap. Use clean, dry cloth or towel to wipe
away excess water and soap.
Fabric and • Do not machine wash or dry the cover.
Harness • Hand wash with cold water and mild soap. Air
dry to prevent shrinking.
• Do not iron.
Plastic Parts • Wipe with a damp cloth and mild soap. Use a
clean, dry cloth or towel to wipe away excess
water and soap.
• Do not use abrasives, solvents, strong
detergents, or household cleaners. These
products can scratch, discolor, and weaken
plastic or cause corrosion on metal surfaces.
Maintenance • If the stroller gets wet, wipe with a clean cloth
or towel to prevent corrosion.
• Do not fold the stroller when wet or damp.
Always make sure that the stroller is dry before
storing.
Storage • To prevent damage to plastic parts, store away
from extreme heat.
• Cover the stroller to prevent dust build-up and
exposure to sunlight.
• Do not stack other items on top of the stroller.
17