Securing Your Child; Infant Car Seat Mode; Using The Infant Car Seat Receivers - Britax B-FREE Guide De L'utilisateur

Securing Your Child

1. Release the harness by depressing the
button in the center of the buckle while
pulling the two tongues away from the
buckle assembly.
2. Fasten the harness by inserting the
tongues on the harness straps into the
buckle assembly.
3. Tighten or loosen the harness straps by
sliding the harness adjusters.
14

Infant Car Seat Mode

All infant car seats MUST be installed rear facing.
IMPORTANT: For non-Britax infant car seats, an infant car seat
adapter must be used. The adapter is sold separately at select
retailers and on www.us.britax.com.

Using the Infant Car Seat Receivers

Attaching the Infant Car Seat Receivers
NOTE: Receivers are marked left and right. Attach each from the
position of the stroller occupant.
1. Lock the parking brake.
2. Unsnap the stroller seat straps from
the frame of the stroller.
3. Align the receivers with the mounts on
the inside frame of the stroller, then
push down until a click is heard. Pull
up on the receivers to ensure they are
secure.
CLICK
15