Securing Your Child; Infant Car Seat Mode; Using A Britax Infant Car Seat - Britax B-READY Guide De L'utilisateur

Securing Your Child

1. Release the harness by depressing the
button in the center of the buckle while
pulling the two tongues away from the
buckle assembly.
2. Buckle the harness around your
child by inserting the tongues on
the harness straps into the buckle
assembly.
NOTE: Ensure the straps are
not twisted as they may become
uncomfortable for the child.
3. Tighten or loosen the harness straps
by sliding the harness adjusters.
18

Infant Car Seat Mode

IMPORTANT: For non-Britax infant car seats, an infant car seat
adapter frame must be used. This adapter frame is sold separately
at select retailers and on us.britax.com.

Using a Britax Infant Car Seat

Attaching a Britax Infant Car Seat
1. Step on the brake pedal until the
indicator window changes to red.
After setting the brake, check
NOTE:
that the brake is set properly by
attempting to roll the stroller forward
and backward. If the stroller will not
roll, the brake is set properly.
2. Insert the Click & Go connectors into
the Click & Go receivers on the frame.
3. Push down until a click is heard.
4. Pull up on both sides of the infant car
seat to ensure that it is secure.
Removing a Britax Infant Car Seat
Refer to your infant car seat user guide for information on the removal
instructions for your specific model.
CLICK
19